Ask us about 6 MONTHS NO PAYMENTS or INTEREST thru PayPal
SAVE $2760.00 while available
Read the new December 2015 CS2P review at: http://www.theaudiobeat.com/equipment/emerald_physics_cs2p.htm
They said: "They fulfilled my wishes for reproduced sound (extension at the frequency extremes, lustrous midrange, tactile soundstaging, speed, solidity, and dynamic prowess) and for speakers in general (easy driveability, affordability and maneuverability)."
The CS2P is the upgrade for the original revolutionary CS2. It is designed for Single amp operation. CS2P's are being closed out quantities are limited.
Save $2760.00 for a limited time. Get the $3000.00 CS2P's in the beautilul $1200.00 black automotive Tri-coat finish and our $850.00 DSP2.4 processor for only $2290.00.
Absolute Sound gave it the Best Affordable Sound at the Rocky Mountain Audio Fest. See issue 230, February 2013. One dealer felt our $6,000.00 system was as good as anything he heard under $50k at the show.
The CS2P is a 3 driver 2.5 way design with dual 15" woofers and our new Emerald Physics 1" compression tweeter. The lower woofer is loaded to roll off at 200Hz. The upper woofer runs to 1000Hz and is a woofer/midrange crossing over to our new custom Emerald physics compression tweeter.
Our Controlled Dispersion design removes most of the room over 300-400Hz so these speakers sound great in virtually all rooms. 93Db sensitivity means that they can be run with amps from as low as 25 watts and up. We do recommend more as they are capable of huge dynamic swings with larger amps.
The speakers have a built in upgrade path. The DSP2.4 crossover/EQ extends the bass to 24Hz. Replace the outboard passive crossover (that comes wit the stock version) with a small second and amp fully biamp the CS2P's. Sensitivity goes to 98Db, dynamics improve as does bass performance and overall system linearity.
CS2P work with inexpensive electronics and sound quite good. Better electronics do make them sound better still.
Ask us about packages with our new Emerald Physics amplifiers as well as complete biamplified systems from only $3900.00 that include 2 amps, speakers, DSP crossover/EQ and a preamplifier with active room equalization and a quality DAC.
Runs off one amplifier, No need to biamp Dipole below 1000Hz, Monopole above 1000Hz Controlled directivity design 80˚ radiation angle Impedance: 4 Ohms Treble Driver: One 1 inch exit compression driver 12 inch diameter Treble waveguide Bass & Midrange: (2) 15 inch Drivers - pulp fiber cone Sensitivity: 93 dB 2.83V @1M @ 1kHz Crossover: External Passive Network Treble: 1000Hz Linkwitz-Riley 2rd Order Bass: 1000Hz Linkwitz-Riley 4th Order Frequency linearity: 40Hz - 20kHz +/-3dB from target curge 24Hz bass with optional DSP2.4 EQ/Crossover
Dimensions: Height: 50.5 in. Width: 22 in. Depth - Baffle: 3 in. Depth: 16 in. Baffle back to back of base Net Weight: 85 lbs each
Features: Open Baffle, Dipole design 93dB Sensitivity Amazing Dynamics Removes Room Acoustics High Power Handling Dual 15” drivers in quasi 2.5 way design Optional DSP crossover and EQ Bi-Amp capable Custom Emerald Physics 1" Compression Tweeter Ultra Low Distortion
Now only $1290.00 in Tri-coat with DSP2.4 (Shown in included Tri-coat black lacquer finish. Normally a $1200.00/pr option. We also offer a Special Edition crossover for an additional $600.00. Currently on sale for only $200.00 with speaker purchase.
Buy with confidence from AudiogoN's number rated seller by feedback.
We accept PayPal, Visa, Discover, MasterCard as well as money orders. Add 2% for PayPal. Call 770-667-5633 with questions or to place your order. GA & HI residents add sales tax.
International sales are paid by bank funds wire transfer only. Emerald Physics is a wholly owned subsidiary of Underwood Hifi Inc.
Design principals of Emerald Physics open baffle loudspeakers:
1) Eliminating the Room: Emerald Physics has developed a method to control a speakers dispersion pattern in order to minimize room interactions and thereby eliminate most of the rooms sonic signature. Our unique BDC (Broadband Directivity Control) technology is a turning point in the history of loudspeaker design. Until now, speaker/room interaction has been one of the major problems in home audio systems. Conventional speakers have wide dispersion and an omnidirectional pattern in the bass range, sending large amounts of sound energy toward the room boundaries, which are reflected back into the listening space with a time delay. These are known as early reflections, which color the sound of the original signal. The omnidirectional bass pattern also excites room resonances in all three axis which tends to cause the boomy, ill-defined bass commonly experienced in many systems. The solution is to create a speaker with a more narrow dispersion pattern as well as a more consistent dispersion angle across the frequency spectrum. Listening to mainly the loudspeakers direct field eliminates most of your rooms sound, creating a consistent and natural playback performance even in difficult rooms.
2) Eliminating the Box: Emerald Physics uses a boxless design approach called open-baffle dipole in order to achieve several important improvements over conventional loudspeakers:
Eliminates box sound preserves the pitch and harmonic beauty of instruments. Eliminates deep bass limits Flat response to 40Hz with 3.75 inch thick baffle. Eliminates impedance swings Maintains same impedance curve as raw drivers. Eliminates large expense of box enclosure typically the most expensive component in the speaker.
3) Eliminating Dynamic Compression: In a perfect world, a speaker would be able to play as loud as required with totally accurate tracking of the musical information as it gets louder. Unfortunately, in the quest for low frequency performance, many speaker designs sacrifice dynamics and efficiency for low bass response. This lack of efficiency creates a sound field that does not always reproduce each bit of musical information correctly. It is one of the reasons that many speaker systems sound out of balance when they play loud or the speaker is required to reproduce a large musical peak. By using several techniques including very efficient professional speaker components, dual 15" woofers and compression tweeters efficiency is maximized. This not only makes the CS-2P speaker system 93Db efficient, it also allows the speakers to sound great with inexpensive amps and associated electronics. When biamped efficiency goes up to 98Db.
4) Eliminating the Need for Expensive Electronics & Cables: The CS2P is a very accurate reproducer of sound. Many speakers, due to their designs, require the need for very expensive electronics to achieve satisfactory performance. Conventional designs have problems with the impedance of the drivers. Emerald designs are easy loads and highly efficient. Upgrading to the digital crossover/EQ and biamping down the road is even better. Passive crossovers are power-robbing components. The CS2P maximizes power transfer. The high frequencies are not harsh or strident and therefore, the need for a softer sounding tube amplifier is not required for the tweeters. The need for expensive cables that filter out high frequency information is also not required. The need for 200 pound amplifiers with huge power transformers is not necessary since the CS2P is very efficient and does not require the large amounts of power that expensive amplifiers offer into low impedance's. In fact, you may find that you will spend hundreds of dollars per channel rather than thousands of dollars per channel to drive the CS2P.
Sales policies on the Underwood Hifi Inc. website at www.underwoodhifi.com
New Speakers in matte black
Re: Emerald Physics CS2P New OB speakers in Tricoat-Save $2760.00 for ltd time
Calculate Estimated Shipping Cost
This feature is only available for logged in members. Please login or register here.