Excellent condition Jolida 801A Integrated Tube Amplifier. I can see no flaws physically, or hear any sonically. I bought it used a couple months ago. Wife isn't happy so sadly it has to go. I couldn't find the specs on Jolida's site, but found it listed on another, but can't guarantee the accuracy below.
3 Line Level RCA inputs, Separate speaker Jacks for 4 and 8 ohm loads.
Local pick up only due to weight and frailty of mailing tubes. Plus you can audition it first. I'm in the SF. East Bay.
Maximum Power Output: 140 W per channel at 8 ohms, 1KHz, at peak 50% duty cycle
Rated Output Power: 70 W per channel at 8 ohms, 29Hz to 25KHz
Frequency Response: (at 1 watt into 8 ohms) 6Hz to 48KHz + 1dB; 0dB at 1KHz
Bandwidth: 14Hz to 70KHz + 3dB; 0dB = 70 W 1KHz, 8 ohms
Distortion THD: Less than 1% at 11V output, 49Hz to 20KHz, 8 ohms
Circuit Type: Ultra Linear, Class AB1
Input Impedance: Less than 100Kohms
Input Sensitivity: Max. 550mV at 1KHz for 70 watt output
Output Impedance: 4 ohms and 8 ohms
Negative Feedback: Less than 5 dB
Noise and Hum: 70dB below rated output.
Tube Complement: 2 matched pairs (4) of 6550/KT88 power output; 1 pc. 12AX7A pre-amplifier, 2 pcs. 12AT7A or 6SN7GT power drivers.
Power Requirements: 110V-120 VAC 60Hz 250 watts-standby, 500 watts maximum (220 VAC-240 VAC 50Hz option).
Dimensions: 18.25 inches (46.5 cm) wide by 13.5 inches (34.5 cm) deep by 8.5 inches (22 cm) high.
Weight: 47 pounds (21.5 Kg) net, approximately 55 pounds (25 Kg) packaged.
Re: Jolida 801A Integrated Tube Amplifier
Sorry! This ad does not allow guest replies. Please log in, or register to reply to this ad.
Calculate Estimated Shipping Cost
This feature is only available for logged in members. Please login or register here.