McIntosh MA2275 Tube Integrated Amplifier in like-new condition, minor scratches on top left trims, including original Owner's Manual, Remote Control, Power Cord, and McIntosh Double Box.
Please add 3% fee from PayPal U.S. accounts or 4% fee from PayPal non-U.S. accounts. SHIP WORLDWIDE. PLEASE CHECK MY OTHER CLASSIFIED ADS and click the green "Follow user" button to see all new items.
Power Output Minimum sine wave continuous average power output per channel, both channels operating is: 75 watts into 2 ohm load 75 watts into 4 ohm load 75 watts into 8 ohm load
Rated Power Band 20Hz to 20,000Hz
Total Harmonic Distortion Maximum Total Harmonic Distortion at any power level from 250 milliwatts to rated power output is: 0.5% for 2, 4 or 8 ohm loads
Frequency Response +0, -0.5dB from 20Hz to 20,000Hz +0, -3dB from 10Hz to 50,000Hz
Sensitivity Phono: 2.5mV for 2.5V rated output (0.5mV IHF) High Level: 250mV for 2.5V rated output (50mV IHF) Power Amplifier Input: 2.5V for rated output
A-Weighted Signal To Noise Ratio Phono Input: 80dB below 10mV input High Level: 93dB below rated output Power Amplifier: 100dB below rated output
Intermodulation Distortion Maximum Intermodulation Distortion if instantaneous peak output does not exceed twice the rated output, for any combination of frequencies from 20Hz to 20,000Hz is: 0.5% for 2, 4 or 8 ohm loads
Preamplifier Maximum Voltage Output Phono: 8V High Level: 8V Main Out: 8V at preamp output
Voltage Gain High Level to Tape: 0dB High Level to Main: 20dB
Wide Band Damping Factor Greater than 18
Power Requirements 100 Volts, 50/60Hz at 3.6 amps 110 Volts, 50/60Hz at 3.6 amps 120 Volts, 50/60Hz at 3.6 amps 220 Volts, 50/60Hz at 1.8 amps 230 Volts, 50/60Hz at 1.8 amps 240 Volts, 50/60Hz at 1.8 amps Note: Refer to the rear panel of the MA2275 for the correct voltage.