Welcome to USAudioMart, a classifieds site for used audio and hifi. Postings are free for hobbyists. Register today and start selling/buying audio gear!
SOLD - FOR SALE: Yamaha PF-800 Turntable IN CHERRY VENEER
Item #649378264Info: Yamaha PF-800 Turntable IN CHERRY VENEER
Sep 10, 17 6:33pm (PST)
Edited: Sep 30, 17 11:24am
Prescott Valley, AZ
[other classified ads]
2 See details
100% Positive Feedback
jnoyes has a verified PayPal account.Verified in United States
|Days in System:||20|
Sponsored post - log in to remove this ad.
** This Ad is Marked as SOLD by seller and cannot be responded to. **
Yamaha PF-800 Belt drive, semi-automatic turntable (auto lift and shut-off)
Refinished in cherry veneer. A one of a kind beauty!
This is a serious Audiophile quality turntable!
This turntable has been completely serviced including, cleaning, adjustment, lubrication, alignment.
New damping fluid in the cueing mechanism so that the stylus lowers slowly onto the record.
New drive belt
New jack plate installed to allow output cable upgrades
New feet that are adjustable for leveling
All electrolytic caps replaced
Sorbothane pads on the transformer mounts for isolation
ADC digital Series cartridge with a new EVG elliptical stylus
The PF-800 is sub-platter belt-driven with a 3-point suspended chassis on inverted springs with rubber surrounds.
The left and right cartridge wires are separated in the techno-looking but dynamically balanced tonearm for better separation.
The resin-cast FG motor supports a double platter, the outer part of which is made of diecast aluminium, the inner part of zinc.
Audiophile touches lie in the conductive carbon-fiber resin headshell, the dynamic balancing of the tonearm and the equally dynamic damping of the tonearm's counterweight.
The resonance frequency was set at 12Hz : a frequency where, according to the Yamaha engineers, there is the least record warp and the least music.
The Twin-Pipe system is an "optimum" mass tonearm and allows better resistance to flexing while avoiding potential capacitive coupling of L and R signal leads.
Dynamic balance twin-pipe straight tonearm, Double Float Suspension System, two-piece platter, and everything else that matters.
Drive system: belt drive
Motor: FG servo DC motor
Platter: 0.86kg zinc (inner), 1.63kg aluminium (outer)
Speeds: 33 and 45rpm
Pitch control: more than +-6%
Signal to noise ratio: better than 80dB
Wow and flutter: less than 0.028% WRMS
Arm type: dynamic balance, twin pipe arm tube
Effective length: 222mm
Offset angle: 23 degrees
Cartridge weight: 2 to 11g
Tracking force: 1.7g (+-0.5g)
Cartridge weight: 4.3g
Dimensions: 473 x 154 x 376mm