** This Ad is Marked as SOLD by seller and cannot be responded to. **
NEW MSRP : $4,100.
SPECIFICATIONS Continuous effective output 100W + 100W/8Ω 140W + 140W/4Ω Input: 4 line systems Phono 1 system (MM/MC switchable) 1 balanced line system Sound recording input/output: 2 line systems Pre- output and main input: 1 system, each Speaker output: A, B 2 systems Amplifier version: ODNF 2.2 Output constitution: Bipolar parallel PP Power transformer: EI type 440VA Damping factor: 110 Harmonic Distortion: 0.005% or less ( 8Ω at 1KHz) 0.03% or less (8Ω and 20Hz~20KHz) Input sensitivity/impedance: PHONO (MM) : 2.5mV/47KΩ PHONO (MC): 0.3mV/100Ω LINE: 180mV/42KΩ BAL. LINE: 180mV/79KΩ MAIN-IN: 1V/51KΩ Output voltage/Output Impedance /Damping Factor: TAPE: 180mV and PRE-OUT: 1V / 110 Signal-to-Noise Ratio (IHF-A): PHONO (MM): Above 91dB PHONO (MC): Above 75dB LINE: Above 105dB Frequency characteristic: PHONO: 20Hz~20,000Hz (±0.5dB) LINE: 20Hz~100KHz (+0dB ~ -3dB) Controls: Front panel: Volume and input selector, meter, power switch, monitor switch, [phono] MC switch, REC out switch, speaker selector, stereo / mono mode selector, bass (±10dB @ 100Hz) & treble (±10dB @ 10kHz) tone controls, subsonic filter (9 Hz) and balance control, line straight switch (tone controls bypass), separate switch (splits the internal preamp from the amplifier) meter light and headphone jack, power on indicator and protection indicator Rear panel： Balanced phase inverter, signal ground and line phase sensor, AC inlet. Remote Control Electric power consumption: 1.2W (stand-by), 82W (idle), 210W (rated output) Dimensions W x H x D: 18.3” (467mm) 7” (179) 17.25” (437) Weight: 46.2 lbs. (21kg)
Power cable, remote and manual. I have original triple box and packing materials