NEW VERSION! With double layer of copper braid shielding. See my tests using an ELF EMI detector and the success in dramatically reducing low frequency electro-magnetic noise.
See the photos - DELL SMPS no shielding, then a single layer of copper braid, finally a double layer: 486mG - No shield Reduced to 100mG - SIngle layer of copper braid 79% reduction Finally to 48mG with the double shield - 90% reduction.
Now this is an extreme case with the detector laying right on an active SMPS - not something you are likely to do with your DC cable. In a real world situation the star quad twist (known to reduce EMI by 30-40%) pulse the double shielding should bring any EMI on this DC cable to virtually undetectable levels.
Custom made. I use these through out my systems to excellent effect. $29 - the cheapest high quality DC cable - better by far then the copper/PVC plastic dielectric Canare 4S6 DC cables.
Features: Four runs of Mil Spec grade Silver plated copper 18awg PTFE Telfon dielectric (the best!) Star Quad twist to reduce EMI/RFI. High quality Switchcraft 2.1mm plugs on each side (I have 2.5mm on one or both ends as well). Double layer of Copper braid shields to reduced EMI/RFI
6 inches short to also reduce RFI pickup. Perfect to connect Iso Regen, Regen, MicroRendu, etc to power supply box, LT3045's PoE DC injector DC port, etc...
Shipping $3.5 USPS US - International by country.
Re: Star Quad Silver/Copper/Teflon 18awg 6in DC cable. 2.1mm NEW VERSION! 2X layers of Copper Shielding
Sorry! This ad does not allow guest replies. Please log in, or register to reply to this ad.